Note
This shows the connection between the TL-1200S and the TS-1232PXU-RP.
4.
Power on the SATA JBOD expansion units.
5.
Power on the NAS.
6.
Verify that the expansion units are recognized by the NAS.
a.
Log on to QTS as administrator.
b.
Go to
Main Menu
>
Storage & Snapshots
>
Overview
>
System
.
c.
Verify that the expansion units are listed.
Hot-Swapping Redundant Power Supply Units
Warning
The NAS may have one or more power supply unit (PSU) cords. To avoid serious injuries,
a trained service technician must disconnect all PSU cords before installing or replacing
system components.
1.
Power off the NAS.
2.
Disconnect the power cord from the electrical outlet and the PSU that you are replacing.
3.
Firmly press the latch toward the handle and then pull the PSU out.
TS-x32PXU User Guide
Installation and Configuration
38
