d.
Place the NAS in its normal upright position.
7.
Power on the NAS.
Installing 2.5-inch Hard Drives or Solid State Drives
The TS-328 comes with 1 drive tray base that supports 2.5-inch hard drives or solid state drives. This tray
base is pre-installed in drive bay 3. For details, see
You can assemble additional 2.5-inch hard drive or solid state drive trays using the available drive tray
caddies and additional drive tray bases. For details, see
Attaching the 2.5-inch Hard Drive or Solid State
.
You can purchase drive tray bases from QNAP or an authorized reseller. For details, go to
Warning
• Installing a drive deletes all data on the drive.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
1.
Power off the NAS.
2.
Remove the NAS cover.
a.
Lay the NAS on its left side.
b.
Remove the screws from the back of the NAS.
TS-328 User Guide
Installation and Configuration
13
