5.
Create an account or sign in to myQNAPcloud.
Note
You must return to this page to complete the installation after creating an account.
6.
Specify the myQNAPcloud device name for the NAS.
Note
• The myQNAPcloud device name is used when remotely accessing the NAS.
• For security purposes, the CloudLink remote connection service will be disabled on your
NAS after initialization. You can enable it by connecting to QTS through LAN and then
installing CloudLink.
7.
Click
Next
.
The
Smart Installation Guide
opens in the default web browser.
8.
Click
Start Smart Installation Guide
.
9.
Specify the following information.
•
NAS name
: Specify a name with 1 to 14 characters. The name supports letters (A to Z, a to z),
numbers (0 to 9), and hyphens (-), but cannot end with a hyphen.
•
Password
: Specify an administrator password with 1 to 64 characters. The password supports all
ASCII characters.
10.
Click
Next
.
11.
Specify the time zone, date, and time.
Tip
QNAP recommends connecting to an NTP server to ensure that the NAS follows the
Coordinated Universal Time (UTC) standard.
12.
Click
Next
.
13.
Select
Obtain an IP address automatically (DHCP)
.
14.
Click
Next
.
15.
Select the types of devices that you will use to access shared folders on the NAS.
16.
Click
Next
.
17.
Click
Configure disks later
.
Note
For details on configuring disks, see the Storage Manager section of the QTS User Guide.
18.
Click
Next
.
19.
Select
No
.
Note
• Enabling the multimedia functions allows you to install multimedia applications after
configuring the disks in Storage Manager.
TS-2888X User Guide
Installation and Configuration
38
