10.
Connect all cables and external attachments.
11.
Connect the power cord to the electrical outlet.
12.
Power on the NAS.
13.
Verify that the module is recognized by the NAS.
a.
Log on to QTS as administrator.
b.
Go to
Control Panel
>
System
>
System Status
>
Hardware Information
.
c.
Check the value for
Total memory
.
QTS Installation
TS-x53Be uses the QNAP QTS operating system. You can install QTS using any of the following methods.
Method
Description
Requirements
Qfinder Pro
installation
(Recommended)
If the NAS is connected to your local area
network, you can do the following:
• Locate the NAS using Qfinder Pro.
• Complete the steps in the Smart
Installation Guide wizard.
.
• Computer
• Network cable
• Qfinder Pro installer
TS-x53Be User Guide
Installation and Configuration
30
