3. Basic Operations
This chapter describes basic device operations.
Audio alerts
Duration
Frequency
Description
Short beep (0.5 seconds) 1
• The device is starting up.
• When the reset button is pressed for 3 seconds,
the device resets configuration.
• When the reset button is pressed for 10 seconds,
the device resets configuration and reboots.
• The operating system was updated.
3
Cannot detect installed disk.
Long beep (1.5 seconds)
3 (every 5 minutes)
• A power error occurred.
• A system fan is not functioning.
• A fan module has been removed.
• The device data cannot be copied to the external
storage device connected to the USB One Touch
Copy port.
2
• A disk volume is about to reach its full capacity.
• A disk volume has reached its full capacity.
• A volume status error occurred.
• A drive is plugged in or out.
1
• The device was powered off by force shutdown
(hardware shutdown).
• The device was powered on successfully and is
ready.
Long beep (5 seconds)
1
QVP is restarting.
LEDs
LEDs indicate the system status and related information when the device is powered on. The following
LED information applies only when the drive is correctly installed and when the device is connected to the
network or to a host.
For details on the location of the LEDs, see
QVP-x1C User Guide
Basic Operations
28
