QNAP QuCPE-701 Series, User Manual

Page: 29 / 43

Basic system reset User Action Result
Advanced system
reset
Press and hold the
button for 15 seconds.
The default factory settings are restored.
• To retrieve old data after an advanced system reset,
recreate the previous folder structure on the device.
LCD Panel
The LCD panel allows you to perform the following operations:
• View network settings
• View information on the system and firmware version
Viewing TCP/IP Settings
You can view the IP address settings for each network adapter on the QuCPE.
1. Press Up or Down .
The panel displays the device name and QNE version.
2. Press Up or Down to view the next TCP/IP screen.
Repeat this step as necessary.
LEDs
LEDs indicate the system status and related information when the device is powered on. The following LED
information applies only when the drive is correctly installed and when the device is connected to the
network or to a host.
For details on the location of the LEDs, see Components .
QuCPE-701x User Guide
Basic Operations 28