Specifications
Model
QSW-M2106-4S
QSW-M2106-4C
Dimensions (H x W x D)
42.5 x
290 x 127 mm
Net weight
1.12 KG
1.12 KG
Input voltage range
100 ‒ 240VAC
Switching capacity
80
Gbps
RJ45 ports
8
SFP+ ports
2
N/A
Combo ports (SFP+/RJ45)
N/A
2
Operating temperature
0˚C to 40°C (32°F to 104°F)
Relative humidity
5% to 95%
(non-condensing)
更多關於安全、法規，與環境法令遵循相關的資訊，請參閱以下網址
www.qnap.com/regulatory/
。
This device complies with CE compliance, QSW-M2106-4C Class B, QSW-M2106-4S Class B.
QNAP GmbH,
Karl-Arnold-Straße 26,
47877 Willich, Germany
QNAP Ltd,
2 Drakes Meadow, Swindon SN3 3LL
United Kingdom
This device complies with the UKCA requirements for products sold in Great Britain.
Office in EU;
Office in UK;
According to the requirement of the WEEE legislation the following user information is provided to
customers for all branded QNAP Electronics products subject to the WEEE directive.
This symbol on the product or on its packaging indicates that this product must not be disposed of with
your other household waste. Instead, it is your responsibility to dispose of your waste equipment by
handing it over to a designated collection point for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste equipment at the time of disposal will
help to conserve natural resources and ensure that it is recycled in a manner that protects human health
and the environment. For more information about where you can drop off your waste equipment for
recycling, please contact your local city office, your household waste disposal service or the shop where
you purchased the product.
If swallowed, a lithium button battery can cause severe or fatal injuries within 2 hours.
Keep batteries out of reach of children.
If you think batteries may have been swallowed or placed
inside any part of the body, seek immediate medical attention.
THIS PRODUCT CONTAINS A BUTTON BATTERY
付属の電源コードは当該製品専用です。他の機器に使用しないでください。
注意！用错误型号电池更换会有爆炸危险，务必按照说明处置用完的电池。
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
FCC Class B(QSW-M2106-4S) and Class B(QSW-M2106-4C) Notice:
This equipment has been tested and found to comply with the limits for a Class B(QSW-M2106-4S) and
Class B(QSW-M2106-4C) digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and
if not installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his own expense.
Modifications: Any modifications made to this device that are not approved by QNAP Systems,
Inc. may void the authority granted to the user by the FCC to operate this equipment.
