manualshive.com logo in svg

QNAP QMiroPlus-201W, User Manual, Page: 66 / 70

Share
Download
QNAP QMiroPlus-201W User Manual Download Page 66

11. Troubleshooting

Hot-swapping Failed Drives

The router supports hot-swapping of drives in the RAID 1 configuration.

RAID Type

Number of Disks

Situation

RAID 1

2

One member drive fails.

1.

Log on to QTS.

2.

Go to 

Main Menu

 > 

Storage & Snapshots

 > 

Storage

 > 

Disks/VJBOD

 .

3.

Locate the failed drive.

4.

Prepare a new hard drive with a capacity that is the same as or larger than the failed hard drive.

5.

Remove the failed drive from the device.

6.

Wait for 20 seconds or until the device beeps twice.

7.

Remove the failed drive from the drive tray.

8.

Insert the new drive into the drive tray.

9.

Install the new drive.

10.

Go to 

Main Menu

 > 

Storage & Snapshots

 > 

Storage Space

 .

11.

Locate the shared folder that contains the new drive and then verify that the status is 

Rebuilding

.

Support and Other Resources

QNAP provides the following resources:

Resource

URL

Documentation

https://docs.qnap.com

Service Portal

https://service.qnap.com

Downloads

https://download.qnap.com

Community Forum

https://forum.qnap.com

QMiroPlus-201W User Guide

Troubleshooting   

65

Summary of Contents for QMiroPlus-201W







































































Reviews:

No comments