5.7.4
System Update
Before updating system firmware, please make sure the product model and
firmware version are correct. Follow the steps below to update firmware:
1.
Download the release notes of the same version as the firmware from QNAP
website
http://www.qnap.com/
. Read the release notes carefully to make
sure you need to upgrade the firmware.
2.
Before upgrading system firmware, back up all disk data on the server to avoid
any potential data loss during system update.
3.
Click the [
Browse…
] button to select the correct firmware image for system
update. Click
Update System
to update the firmware.
System update may take several minutes to complete depending on the network
connection status. Please wait patiently. The system will inform you when system
update is completed.
When performing system update, please make sure the power supply is at steady
state. Failed to do so may cause the system unable to start up.
Note:
If the system is running properly, you do not need to update the firmware.
QNAP is not responsible for any forms of data loss caused by improper or illegal
system update.
75
