
6 of 8
Installation of the bracket
Take out CC
/
L/A from the packaging , please let the
pre-set wire go through the hole as illustrated in the picture.
Take out K/EE/FF/N(spanner M10) from the packaging ,
installation as illustrated in the picture.
S5
S6
Take out N/J from the packaging ,lock the four allen pan head screws(M8x10) with Hexagon wrench in N,then use cable ties
in N to tie up the wires,as is shown in the pictures below.
S7
L CC
A
(magentic spirit level)
K
FF
N
(spanner M10)
N
(Cable ties)
N
(Hexagon wrench)
(screw M8x10)
J
EE
CAUTION
Don't over tighten!