QMTV MAM-600 Installation Manual Download Page 2

7

2 of 8

Tools Needed for Assembly

WARNING

Table of Contents

Parts List ........................................................................................................................................................................ 3

Critical requirements of the installation

. .

.. .......................................................................................................... 4

Installation of the bracket

.......................................

.................................

...................................................................

Installation of Screen & adjustment of the spring pressure ............................................................................................

5, 6

8

Product dimensions ........................................................................................................................................................
Maintenance instructions ................................................................................................................................................ 8

Be sure to read this entire manual thoroughly and you 

Sufficient expertise is required for installing of this product. Be sure to subcontract the installation to a qualified pe-

rson. Ensure special attention to safety is paid during installation. Tranquil mount is not liable for any damage or in-

jury caused by mishandling or improper installation, or by installing anything other than the specified product. Your 

Statutory Rights, (if any) are not affected.

If the safety precautions are not observed or the product is used incorrectly, it may result to serious injury or dam-

age to your wall and TV.This instruction manual shows the correct handling of the product and important precauti-

ons necessary to prevent accident. Be sure to read this manual thoroughly and use the product correctly. Keep the 

manual available for future reference.

Ensure your hands and fingers stay clear from the adjustable moving mechanics at the back of the bracket. This is 

to avoid your fingers getting trapped. Please supervise children when this product is in use.

This product is supplied with small parts for installation. For your children’s safety please keep out of reach of chil-

dren at all times.

fully understand all the instructions and warning before 

   attempting to begin your installation.

Required Tools

Optional Tools

3/16” 3/8”

Before you begin, please verify that all components are included and undamaged. If any parts are 

missing or damaged, contact Product Supplier,Never proceed with missing or damaged parts!

Lay out all components and make sure you identify that each one has a match in the diagram.Some

of the parts included will not be used during installation.Do not proceed if you do not understand and

identify all of the components.

This product should only be installed by someone who has a basic knowledge of buiding construction,installations and fully

     understands these instructions.

Make sure that the supporting surface will safely support the combined load of the mount, the display and all

   attached hardware and components.

This wall bracket will only supporting flat panel displays(LCD,Plasma).The maximum load capacity is 70.5 pounds.

If mounting to a wall of wood stud construction, be sure that mounting bolt are anchored to the center of the studs

When installing the TV mount on a concrete wall, the wall must be at least 8"(203mm) thick with a minimum comp-

ressive strength from 2500 to 3000 psi (17.2 to 20.7 MPa),the concrete wall must meet ASTM C39. When installing 

the TV mount on a cinder block wall, the cinder blocks must meet ASTM C216 specifications and have a minimum 

nominal width of 8”(203mm). Be sure to mount in a solid part of the block, generally 1"(25 mm) minimum from the 

side of the block.Do not drill into mortar joints! If plaster/drywall is thicker than 16mm,custom fasteners must be su-

pplied by the installer.

 

 

Always have someone assist you to lift and position your equipment.

T

Screws must be tightly secured,but do not overtighten any screws (especially the four hex bolt screws M8x63.5mm) 

or damage can occur and product may fail.

ighten screws and bolts firmly, but do not over tighten. Over tightening can damage the items and greatly reduce 

   their ability to hold. Please refer to suggested torque values where applicable in these instructions.

Summary of Contents for MAM-600









Reviews: