QMS PS 410, User Manual

Page: 135 / 288

Dark Image (entire page)
1. Decrease the print density by turning the print density dial
inside the printer to a higher number.
2. Remove the toner cartridge and rotate it as you would when
installing a new cartridge. This redistributes toner inside the
cartridge.
3. Install a new toner cartridge; the old one may be defective,
releasing too much toner.
Black Image (entire page)
1. Install a new toner cartridge.
2. Contact your QMS vendor.
Smudge Along Right Edge of Page
1. Install a new toner cartridge.
Smudges on Back of Page
1. Produce a cleaning sheet from the buttons on the display panel.
The paper path may be dirty.
2. Toner may have escaped into the printer. See “Keeping Your
Printer Clean” earlier in this chapter.
3. The EP-L cartridge may be damaged. It may need to be
replaced.
Chapter 7
T r o u b l e s h o o t i n g P r i n t e r P r o b l e m s 7 - 1 9