QMS CF 2215, User Manual

Page: 29 / 50

Using the
Emulation
2-15 Installation
Free Format
Sets the MAGNUM emulation to Free Format mode, which ignores all
hex values from 00 to 1F.
Ignore Mode
Sets the MAGNUM emulation to ignore all data sent until receipt of a
^A command.
Choices On—Enables the printer to interpret Code V programming
language commands.
Off—Sets the printer in Straight Thru mode, disabling
interpretation of Code V programming language
commands.
Default Off
Menu Administration/Emulations/MAGNUM/Code V Setup/Free Format
Choices On—Enables Free Format mode.
Off—Disables Free Format mode.
Default Off
Notes To enable Free Format mode on MAGNUM emulation
start-up, set both this option and the Administration/
Emulations/MAGNUM/Code V Setup/Free Format/
Conversion option to On.
When Free Format is enabled, form control characters
(carriage return and line feed) are ignored, and paper
positioning must be controlled via the following Code V
programming commands.
^- = Carriage return
^* = Line feed
^, = Form feed
See the Code V Version II Programming Language Manual
for more information on this option.
Menu
Administration/Emulations/MAGNUM/Code V Setup/Ignore Mode
Choices Enable—Enables Ignore mode.
Disable—Disables Ignore mode.