QMS CF 2215, User Manual

Page: 18 / 50

Configuring
Printer Memory
QMS MAGNUM Emulation User's Guide 2-4
Procedure
Before you reconfigure the printer’s memory, print an advanced sta-
tus page. It provides a record of all current configuration settings,
which you may need if you have to reset the printer to its current
default settings. (See your printer documentation for information on
how to print an advanced status page.)
We recommend that you read this entire procedure before modifying
any memory settings. If you experience problems when configuring
the printer’s memory, use the advanced status page to reset the
printer to your current default memory settings.
s Caution:
If you have already reconfigured your QMS printer's
memory with settings unique to your print environment, do not
perform an Administration/Memory operation before you either write
down any unique memory settings or print an advanced status page .
You will need this information if you have to return the printer to its
current memory settings. A Restore Defaults setting is available on
your printer, if you need to cancel all configuration changes and reset
the printer to its factory defaults.
1 Access the Administration/Memory menu via the control
panel.
See your printer documentation for details on how to access
menu options.
2 Change the Administration/Memory/K Mem Emulation setting
on your printer to 2 MB (2048 KB).
» Note: If your printer already has this memory correctly
configured, you can skip to the “Downloading the Emulation”
section, later in this chapter.
Press the Previous or Next key to advance through the different
memory clients. With the Administration/Memory/K Mem Emula-
tion memory client displayed in the message window, press the
Select key once.