QMS 2425, Getting Started, Page: 63 / 144

3ULQWLQJD
6WDUWXS3DJH
6HWWLQJ8S<RXU3ULQWHU
3ULQWLQJD6WDUWXS3DJH
When you turn on the printer, a start-up page prints. This page gives
you an overview of your QMS 2425/2425
TURBO Print System.
The following information prints on the start-up page:
„
Printer product name, firmware level number, software version,
revision, and release numbers.
„
Cumulative page count for all page sizes, separate 11 x 17"/A3
page count, amount of resident RAM (in megabytes), number of
PostScript typefaces in ROM, default resolutions, and disk online
notification (if attached).
„
CrownCopy logo, if this option is installed.
„
ImageServer logo, if this option is installed.
„
Paper source lists the type of paper in each input bin.
„
Options list all installed printer options.
„
Interfaces lists all standard and optional interfaces
» Note: When a font SIMM is installed, the following appears in the
Options section of the start-up page even though you have only one
installed:
%Cartridge1%
%cartridge%
Also,
Serial RS-232C
always appears on the start-up page, even
when the serial option isn’t installed. Remember that the serial inter-
face is an optional interface which must be purchased through your
QMS vendor. See appendix A, “QMS Customer Support,” for a list of
locations and telephone numbers.
If a start-up page does not print, see chapter 6, “Troubleshooting,” of
the
Operation guide for more information on printing a start-up page.