QMS 2425, Getting Started

Page: 53 / 144

/RDGLQJWKH
0HGLD&DVVHWWH
6HWWLQJ8S<RXU3ULQWHU
/RDGLQJWKH0HGLD&DVVHWWH
The QMS 2425/2425 TURBO Print System comes standard with two
500-sheet universal media cassettes. The upper tray holds letter/A4
or legal/B4 media, and the lower tray holds letter/A4, legal/B4, or 11”
x 17”/A3 media. The printer automatically pulls paper from the cas-
sette. Loading media in either cassette involves the following steps:
„
Open the cassette
„
Set the correct media size for the cassette
„
Load media in the cassette
„
Close the cassette
Each of these steps are described in detail, later in this procedure.
» Note: Ensure that the media size matches the cassette size (for
example, letter/A4 media must be loaded only when the cassette is
set to letter/A4 size). Since the media cassette sends a media size
signal to the printer controller, using a wrong size media will cause
your image to be positioned incorrectly on the page or clipped.
2SHQWKH&DVVHWWH
» Note: When you load media, the cassette should be opened and
closed like a drawer, but not removed. If you remove it, remember it
may take several minutes to reposition the cassette on the guide rails.