QMS 1660, Operation

Page: 22 / 122

Loading the
Multipurpose
Tray
QMS 1660 Print System Operation 2-10
Envelopes: Special Considerations
The QMS 1660 Print System is not specifically designed to support
envelope printing. But if you want to test print a standard envelope to
see if the print quality is suitable for your needs, keep in mind the fol-
lowing considerations:
n
Use landscape orientation to create the envelope text in your
application short-edge first.
n
Set the multipurpose tray to universal paper size.
n
Feed the envelope in the multipurpose tray short-edge first.
See chapter 4, “Printer Configuration,” of the Reference for more
information on multipurpose tray size.
n
Open the envelope flap as soon as the envelope is deposited in
the output tray. This prevents the flap from sealing shut due to the
heat involved in the printing process. After inserting your docu-
ment in the envelope, you can seal the flap as usual.
Labels: Special Considerations
Labels are printed from the multipurpose tray. Keep in mind the fol-
lowing considerations:
n
Use only labels recommended for laser printers, such as Avery
5260 or Canon label stock.
n
Load up to 40 labels at a time in the multipurpose tray.
n
Format the label information in your application. Try printing the
formatted information on a plain sheet of paper first to check
placement. (See your application documentation for specific
information on formatting and printing labels.)