.
.
QMD Install manual D06400210010G PTZ Dome Camera
30
In case of dealing with a
concrete
surface:
a.
Mark the locations for screw through the holes on the base
b.
Make holes on the wall, then insert the supplied plastic plugs into the holes and
squeeze them in until they are flush with the wall surface.
c.
Mount the base on the desired place tightly with screws
6.1
Surface mount
(only for 10x zoom version)
1.
Before installation starts, put mounting base and plastic housing together to
make a base module
2.
Locate the base module onto the place the camera is to be mounted, and fix
the base on the surface completely with screws through the 3 holes on the
base
(be sure the cables are well located throughout the cable outlet)
3.
Get the camera and plug it onto the base; watch for the direction of the
connectors on camera and mounting base and be sure they are mated well.
Then rotate the camera body counter-clockwise until it is completely locked
4.
Put the safety screw
(anti-loss)
in locking position and screw it in
Integrate the mounting base and the
plastic housing as a module
Mounting the module to the surface
Fit the camera into the module and
lock it in position
Put the safety screw in place
