QMAXZ Lighting QS Series, User Manual

Page: 23 / 36

QS series manual v3.09 QMAXZ © 2009 - 22 -
MOVE MODE
Setting the pan-tilt move mode, use [UP] or [DOWN] buttons to select, after selection press first
[MENU] then [ESC] to store configuration(display will show “Storing Configuration”) .
Default value is Normal.
RUN TIME
View the fixture runtimes, press [MENU] to select/deselect or [ESC] to exit, to reset the lamp hrs. &
lamp strike counters press and hold [UP] & [DOWN] for 15sec..
RESET MENU
Perform a complete or individual reset, use [UP] or [DOWN] buttons to scroll the list, press [MENU] to
execute the reset and return to previous menu, [ESC] to exit.
TEMP MODE
Setting the fan’s mode, use [UP] or [DOWN] buttons to select, after selection press first [MENU] then
[ESC] to store configuration(display will show “Storing Configuration”) .
Default value is Auto.
CALIBRATION
Setting the individual motor calibration, use [UP] or [DOWN] buttons to scroll the list, [ESC] to exit,
press [MENU] to highlight the value, use [UP]/[DOWN] to set the value, after setting press first
[MENU] then [ESC] to store configuration(display will show “Storing Configuration”) .
Default value is “0”.
TEMP INFO
View the fixture base and head temperatures and fan speed, press [MENU] to select/deselect or
[ESC] to exit.
7.5 RDM Functions
QMAXZ QS-series fixtures are able to handle RDM (Remote Device Management) commands, to
use RDM commands a RDM interface device is necessary, ask your dealer for more info.
7.6 Software update
QMAXS QS-series fixtures can be updated by using the USB connection on the back side of the LCD
display inside the fixture, for instructions ask your dealer or download the update instructions,
QMAXZ update-program and latest software on www.qmaxz.com.