QM-products SPM-2011, Operation Manual

Page: 11 / 20

QM-Products 2016 v1.0 11
System
4.2.5 “LAN” page
In “LAN” page (Figure No 6) the user is able to setup all the parameters of the LAN
control of the device as follows:
Figure No 6

DHCP – Enable or disable DHCP

IP address: Set a static IP address for controlling the device

Subnet mask: Set the specific Subnet mask

Gateway: Set the gateway’s IP address

Primary DNS: Set the IP address of the primary DNS

Secondary DNS: Set the IP address of the secondary DNS

Port: Assign the control port

MAC address: Depicts the MAC address of the LAN control