Qlogic SANsurfer FC HBA Manager, User Manual, Page: 76 / 152

6 – Getting Started
SANsurfer FC HBA Manager Main Window
6-10 SN0054651-00 B
S
‰ Warning . Warning alarm.
‰ Loop Down . No synchronization.
‰ Bad . Bad alarm.
‰ Offline . HBA on offline host.
HBA Port Icons and Text
The HBA tree lists the following information about HBA ports:
„ HBA port number: For example, Port n .
(or, for QLE8042 HBAs, also FCoE Engine .)
„ HBA port alias: User-defined alias name (if assigned). For more
information, see Displaying HBA Port Information in the help system)
„ Beacon flashing–Flash HBA Port Beacon: Port LED flashing is enabled.
For more information, see Finding an HBA Port in the help system.
„ HBA status : Indicates status such as bad alarm, loop down, warning alarm,
or good (no alarm). For information about alarms, see Viewing and
Managing the HBA Event Log in the help system.
Examples:
Port 0:Marketing’s HBA port:Good, Beacon Flashing
Port 3:Loop Down
FCoE Engine
„ HBA Port Icons :
Device Icons and Text
The HBA tree shows the following information about disks, tapes, and SAFTE
devices:
„ Device type : Disk, tape, or SAFTE (used for enclosure information).
„ Device port ID : Port ID of the disk, tape, or SAFTE device.
‰ Good
‰ Warning. Warning alarm
‰ Loop Down
‰ Bad. Bad alarm
‰ Offline. HBA port on offline host
‰ SFP not installed (for 8G HBA)
‰ Beacon Flashing, Good
‰ Beacon Flashing, Warning
‰ Loop Down, Beacon Flashing
‰ Beacon Flashing, Bad
‰ FCoE Engine (for QLE8042)