6 – Port Configuration
Modifying Port Operating Characteristics
6-6
59183-03 A
S
Transceiver Information
Enter the
Show Media
command to display operational information about one or
more transceivers as shown in the following example. Refer to
Table 14-39
for a
description of the transceiver information in the Show Media display.
SANbox #> show media 4
Port Number: 4
-------------
MediaType 400-M5-SN-I
MediaVendor FINISAR CORP.
MediaPartNumber FTRJ8524P2BNL
MediaRevision A
MediaSerialNumber P6G22RL
MediaSpeeds 1Gb/s, 2Gb/s, 4Gb/s
Temp Voltage Tx Bias Tx Pwr Rx Pwr
(C) (V) (mA) (mW) (mW)
----------- ----------- ------------ ----------- -----------
Value 37.32 3.33 7.30 0.373 0.000
Status Normal HighWarning Normal Normal LowAlarm
HighAlarm 95.00 3.90 17.00 0.637 1.264
HighWarning 90.00 3.70 14.00 0.637 0.791
LowWarning -20.00 2.90 2.00 0.082 0.028
LowAlarm -25.00 2.70 1.00 0.073 0.019
Modifying Port Operating Characteristics
You can make permanent or temporary changes to port operating characteristics.
You make permanent port configuration changes using the
Set Config Port
command. These changes are saved in the active configuration and are
preserved across switch or port resets. The
Set Port
command makes temporary
changes that apply until the next port or switch reset, or until you activate a
configuration.
NOTE:
The Show Media command requires the SANdoctor license key. To
purchase a license key, contact your authorized maintenance provider or
authorized reseller.
NOTE:
8-Gbps SFPs do not support the 1-Gbps setting. Setting a port to 1-Gbps
that has an 8-Gbps SFP will down the port.
Summary of Contents for SANbox 5600 Series
