4
HBA LEDs
For More Information
Refer to the
InfiniPath Install Guide
, the
InfiniPath User’s Guide,
and the Release Notes for information on installation
and use of QLogic HCAs and InfiniPath software. See the Downloads section of the QLogic web site
www.qlogic.com.
Warranty
The QLogic Adapter comes with a standard three year QLogic warranty, or as specified by other agreements. Please
check the QLogic Web site at
http://www.qlogic.com/Support/warranty.aspx
for warranty details.
Product Regulatory Compliance
QLogic Host Channel Adapters
The following sections contain a summary of EMI test specifications performed on the QLogic Interconnect hardware
adapters to comply with radiated emission, product safety standards, and regulatory compliance markings.
EMI Requirements Compliance Statements
United States
FCC Part 15 compliance:
Class A
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at their own expense.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operations.
Changes or modifications not expressly approved by QLogic could void the user’s authority to operate the equipment.
QLE7xxx LED Scheme
LED
Color
Status
Power
Green
ON
Signal detected.
Ready to talk to an SM to
bring the link fully up.
OFF
Switch not powered up.
Software not installed or
started.
Loss of signal.
Check cabling.
BLINKING
a
Helps locate the adapter.
Both the green and amber
LEDs will blink.
a
Feature controlled by ipath_control
-b [On | Off]
Link
Amber
ON
Link configured.
Properly connected and
ready to receive data and
link packets.
OFF
SM may be missing.
Link may not be config
