3
Quick Start Guide
Installation Instructions
This Quick Start Guide describes how to install and configure your new QLogic QLE7
xxx
Host Channel Adapter (HCA)
in three simple steps:
❑
Step 1. Verify the package contents.
❑
Step 2. Install the HCA hardware.
❑
Step 3. Install the InfiniPath™ software.
Keep the HCA in the antistatic bag until installation. The HCA contains parts that can be damaged by
electrostatic discharge (ESD). Before handling the HCA, use standard methods to discharge static
electricity. Place the HCA on the bag when examining it. Retain the bag for future use.
Step 1. Verify the Package Contents
The QLogic HCA is shipped with the following items:
❑
QLogic QLE7
xxx
Adapter
❑
Low-profile bracket (not available in all models)
❑
Quick Start Guide (this document)
Step 2. Install the HCA Hardware
To install the HCA hardware, please refer to the instructions in the
InfiniPath Install Guide
. To view this document, go to
the QLogic web site,
www.qlogic.com
, and click the Downloads tab.
Step 3. Install the InfiniPath Software
To install the InfiniPath software, please refer to the instructions in the
InfiniPath Install Guide
. To view this document,
go to the QLogic web site,
www.qlogic.com
, and click the Downloads tab.
Congratulations!
You have successfully installed your QLogic HBA!
❑
To obtain the most current drivers, management tools, user instructions, and documentation, please visit the
QLogic website at
http://support.qlogic.com/support/drivers_software.aspx
and download the latest versions.
❑
The following section contains additional information about the QLogic HBA, including the LED scheme,
troubleshooting, warranty, and certification information.
CAUTION!
