Qlogic QLA4010, User Manual, Page: 27 / 82

4 – Windows Server 2003 Driver Installation
Installing the Driver
IS0053302-00 7 PRELIMINARY 4-3
Q
After all the standard devices have been loaded, press S to Specify Additional
Device. Go to step 5 .
3. If you are booting from the Windows installation floppy disks, after the standard
devices have been detected and configured, press S to Specify Additional
Device .
4. Select Other and press ENTER.
5. Insert the QLogic driver disk created in section 4.3 and press ENTER.
6. Select the QLogic QLA4010 PCI iSCSI Adapter , then press ENTER .
7. Continue with standard installation procedure.
4.4.2
Adding the QLA4010/4010C HBA to the Existing OS
NOTE: The QLA4010 adapter is a multifunction device. When installed in a
plug-and-play system, Windows Sever 2003 detects two functions for
each adapter: ethernet controller and network controller.
Perform the following steps to add the QL4010.SYS driver to an existing
Windows Sever 2003 system:
1. Install the QLA4010/4010C HBA in the appropriate slot on your computer (see
section 2.1) .
2. Restart or power up your computer. Log in as Administrator.
3. When your computer powers up, Windows Sever 2003 detects the newly
installed device, then displays the Found New Hardware with Ethernet
Controller message. The Found New Hardware Wizard program is launched
to begin installing the QL4010NULL? should be QLA4010.sys? driver for the
QLA4010/4010C HBA.
4. Select Install from a list or specific location (Advanced) . Click Next .
5. Select Search for the best driver in these locations . Type or browse the path
of the QLogic driver directory. For example:
A:\
6. Insert the QLogic driver disk created in section 4.3 . Click Next .
7. When the Security Alert—Driver Installation dialog box displays, click Yes
8. In the Completing the Found New Hardware Wizard dialog box, click Finish .
9. Windows Sever 2003 displays the Found New Hardware Wizard with
Network Controller message. The Found New Hardware Wizard program
is launched to begin installing the QL4010.SYS driver for the QLA4010.
10. Select Install from a list or specific location (Advanced) . Click Next .