Qlogic OFED+ Host, Software User'S Manual, Page: 184 / 284

B – SRP Configuration
QLogic SRP Configuration
B-8 IB0054606-02 A
noverify: 0
description: "SRP Virtual HBA 0"
end
The
ib_qlgc_srp_build_cfg
command creates a configuration file based on
discovered target devices. By default, the information is sent to
stdout
. In order
to create a configuration file, output should be redirected to a disk file. Enter
ib_qlgc_srp_build_cfg
-h
for a list and description of the option flags.
Specifying an SRP Initiator Port of a Session by Card and
Port Indexes
The following example specifies a session by card and port indexes. If the system
contains only one adapter, use this method.
session
begin
#Specifies the near side by card index
card: 0 #Specifies first HCA
port: 1 #Specifies first port
targetIOCGuid: 0x00066013800016C
end
Specifying an SRP Initiator Port of Session by Port GUID
The following example specifies a session by port GUID. If the system contains
more than one adapter, use this method.
session
begin
portGuid: 0x00066A00a00001a2 #Specifies port by its GUID
targetIOCGuid: 0x00066A013800016C
end
NOTE
The default configuration generated by
ib_qlgc_srp_build_cfg
for OFED
is similar to the one generated for the QuickSilver host stack with the
following differences:
 For OFED, the configuration automatically includes
IOClass
 For OFED, the configuration automatically includes
SID
 For OFED, the configuration provides information on
targetPortGid
instead of
targetPortGuid
 For OFED, the configuration automatically includes
targetIOCProfileIdString
.