68
83840-546-00 E
8
iSCSI Protocol
iSCSI Offload in Windows Server
iSCSI Offload on VMware Server
iSCSI Boot
QLogic 8400/3400 Series Gigabit Ethernet adapters support iSCSI boot to enable
network boot of operating systems to diskless systems. iSCSI boot allows a
Windows, Linux, or VMware operating system boot from an iSCSI target machine
located remotely over a standard IP network.
For both Windows and Linux operating systems, iSCSI boot can be configured to
boot with two distinctive paths: non-offload (also known as Microsoft/Open-iSCSI
initiator) and offload (QLogic’s offload iSCSI driver or HBA). Configuration of the
path is set with the
HBA Boot Mode
option located on the
General Parameters
screen of the iSCSI Configuration utility. See
for more information on all
General Parameters
screen configuration options.
Supported Operating Systems for iSCSI Boot
The QLogic 8400/3400 Series Gigabit Ethernet adapters support iSCSI boot on
the following operating systems:
Windows Server 2008 and later 32-bit and 64-bit (supports offload and
non-offload paths)
RHEL 5.5 and later, SLES 11.1 and later (supports offload and non-offload
paths)
SLES 10.x and SLES 11 (only supports non-offload path)
VMware ESXi 5.0 and later (only support non-offload path)
Summary of Contents for FastLinQ 3400 Series
Page 286: ......
