Qlogic BR-815, Quick Start Manual

Page: 14 / 17

BR-815, BR-825 Fibre Channel Host Bus Adapter Quick Start Guide
Installing Software
8 BR0054507-00 B
5. If a backup directory exists for previously installed software, a
Found
Backed up data
message prompts you to restore old configurations.
Select either to restore or not to restore and continue installation. If this
message does not appear, go on to
Step 6 .
6. If a message window lists existing software components already installed on
your system, select one of the following options, and then click
Continue ,
and then skip to Step 10 . If this message does not appear, go on to Step 7 .

Install with existing configuration . The installer compares each
configured property and keeps the original value if different
from
the
default value.

Install with default configuration . The installer upgrades the
software and loads with default configurations.
7. If a message prompts you to close HCM, close the application if it is running,
and then click
OK on the message box.
8. When the Choose Install Set window appears, select the software you want
to install, and then select
Next .
If you are installing the management utilities and messages warn that HCM
agent requires storage and network driver installation or does not match
current driver installation, and then click OK , and then select the
Management Utilities and Storage and Network Drivers options to install.
If a message warns that the installed boot image is not compatible with the
driver installation, perform one of the following steps:

Select Yes to update the image and continue installation.

Select No to not update the image and continue installation.
9. If the Choose Install Folder window prompts you to choose a destination
folder for the software, select one of the following options. If this window
does not appear, go on to
Step 10 .

Enter a location for installing the software.

Select Choose to browse to a location on your file system.

Select Restore Default Folder to enter the default installation folder.
10. When the Package Location Information window lists the installed software
components and their location on your system, select Next to continue.