Qlogic 3000 Series, User Manual

Page: 17 / 114

NE0154601-00 A 3-1
3
Installation Instructions
This section provides instructions for advanced users who are already familiar
with hardware and software installation procedures. See the appropriate section,
as applicable:
„ “QLogic Adapter Installation and Verification” on page 3-1
„ “Windows Server Driver Installation” on page 3-2
„ “Linux Driver Installation” on page 3-4
QLogic Adapter Installation and Verification
The following sections provide high-level instructions for installing the QLogic
adapter. For more detailed instructions, see
“Hardware Installation” on page 4-1 .
Pre-installation Checklist
Before installing the QLogic adapter:
1. Verify that the system meets the requirements specified in “System
Requirements” on page 2-1 and in the Release Notes.
2. Power down the system.
QLogic Adapter Installation
To install the QLogic adapter:
1. Insert the QLogic adapter into an available PCI Express
®
slot.
2. Connect the appropriate cables to the QLogic adapter.
3. Power up the system.
Verify the QLogic Adapter Installation
To verify that the QLogic adapter has been installed correctly, perform the steps in
the appropriate section.
Linux
On Linux systems, execute the following command:
# lspci -vvv -d 4040: