REPLACING THE FUSE
The main fuse is located on the starter relay under the seat on front
right side, with rated current capacity of 20A.
Remove starter relay coupler, and you will see it.
Remove 6 screws
①
on front ventilation plate
③
.
Remove front ventilation plate, fuse box
②
will be seen.
Rated current capacity of fuse: 10A&5A.
If the fuse is burnt frequently, it indicates short circuit or overload
in the electrical system; you should consult the local dealer.
NOTE:
Turn the main switch to OFF when checking or
replacing fuse to avoid short circuit.
Replace the fuse: Remove the used fuse and install a new one.
WARNING:
Only use the fuse of specified current capacity. Using incorrect fuse may result in damage
to the electrical system, or cause fire. Incorrect fuse may also cause illumination failure
or engine failure during night driving.
33
USER'S MANUAL
Summary of Contents for legacy 250
Page 44: ...ELECTRICAL DIAGRAM ...
