STARTING THE ENGINE
Hold the rear brake lever to lock the rear wheel.
WARNING: Rear wheel may run if it is not braked.
A running wheel may cause injury.
NOTE:
Release the start button as soon as the engine is started. Do not press the start button while the engine
is running, otherwise the engine ay be damaged.
Only when the sides stand returns and brake lever is held, the engine can be started.
The start button must not be pressed for longer than 3 to 4 seconds. If the engine can't be started,
release the start button for 10 seconds.
Add a bit throttle and start again.
If the motorcycle has been suspended from service for a long time or there is no fuel in the fuel
tank, the starting time will be longer.
NOTE:
Do not release the rear brake lever before the motorcycle starts to run.
20
Insert the key into main switch, and turn to “ ”.
Turn kill switch to “ ”.
Return side stand.
Turn the throttle
①
by 1/8 to 1/4 round.
Press start button
②
to start the engine.
USER'S MANUAL
Summary of Contents for legacy 250
Page 44: ...ELECTRICAL DIAGRAM ...
