Qlima D 110, Operating Manual

Page: 22 / 44

OPERATION
1. Plug the power cord into the socket.
2. Make sure that the water container is positioned correctly. When the device is used
for the first time a light
3
will come on. Afterwards, remove the water container
from the device and replace it in the correct position.
3. Press button

to turn the dehumidifier on or off. The indicator light
1
will come on.
The setting buttons (10) can be used to set the desired air humidity. The hygrostat can
be set from 35% - 85%. Each time the button (10) is pressed the setting increases or
decreases by 5%.
The dehumidifier begins dehumidifying when the air humidity in the room is higher than
the setting. When the setting has been reached the device automatically switches off, and
comes on again when the humidity in the air increases.
Continuous operation can also be selected. To do this, press button
8
, and the indicator
light
7
will come on. The air dehumidifier will now start dehumidifying, irrespective of
the level of air humidity in the room.
4. The ventilator speed can be adjusted with the button

. The device has two
ventilator speeds: Low (the indicator light
2
is on), High (the indicator lamp
2
is off).
5. If desired, the timer function can be used.
Setting the off timer
Turn on the unit using button

and press on button
9
. The indicator light
6
will come
on. The buttons

can be used to set the desired off period. For the first 10 hours the off
period for each press on the button

will be increased or decreased by half an hour.
After that, every press on the button

will adjust the time by one hour.
After setting the off period, wait three seconds and the display will automatically return
to the operating stand. The unit will now automatically switch off after the set time has
elapsed.
Setting the timer
Make sure that the unit is turned off. Press the button
9
, the indicator light
6
will come
on. The buttons

can be used to set the desired period. For the first 10 hours the on
period for each press on the button

will be increased or decreased by half an hour.
After that, every press on the button

will adjust the time by one hour.
The unit will now automatically switch on after the set time has elapsed.
Turning off the timer
The timer can be turned off by turning on and off the unit using button

or by setting
the timer to 0.0 hours.
4
22