CERAMIC OSCILLATING HEATER with DIGITAL THERMOSTAT CONTROL
READ AND SAVE THESE INSTRUCTINS
READ CAREFULLY BEFORE ATTEMPTION TO ASSEMBLE, INSRALL, OPERATE OR MAINTAIN THE
PRODUCT DESCRIBED PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY
INFORMATION. FAILURE TO COMPLY WITH
INSTRUCTIONS COULD RESULT IN PERSONAL INJURY/OR PROPERTY DAMAGE!
GENERAL SAFETY INFORMATION
1
、
Read all instructions before using Heater.
2
、
Use this Heater only as described in this manual .Any other use not recommended by the manufacture may
cause fire, electrical shock, or injury to person.
3
、
Make certain that the power source conforms to the electrical requirements of the Heater.
4
、
Extreme caution is necessary when any Heater is used by or near children or invalids and whenever the
Heater is left operating unattended.
5
、
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock.
This plug is intended to fit in a polarized outlet only one way .If the plug does not fit fully in the outlet,
reverse the plug .If it still does not fit, contact a qualified electrician.
6
、
Where possible, avoid the use of extension cords because the extension cord may overheat and cause a risk of
fire .if they must be used, minimize the risk of overheating by ensuring that they are CUL/UL listed, a
minimum No.14AMG, rated not less than 1875 watts and of proper length.
7
、
Do not operate any Heater with a damaged cord or plug or after the Heater malfunctions, has been dropped or
damaged in any manner. Return Heater to authorized service facility for examination, electrical or mechanical
adjustment or repair.
8
、
Unplug power cord before servicing or moving the Heater. Always unplug Heater when not in use.
WARNING: DO NOT DEPEND ON THE ON/OFF SWITCH AS THE SOLE MEANS OF
DISCONNECTING POWER WHEN SERVICING OF MOVING THE HEATER. ALWAYS UNPLUG
THE POWER CORD.
9
、
Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as it may cause an
electrical shock or fire, or damage the Heater .Do not block or tamper with the heater in any manner while it
is in operation.
10
、
To prevent a possible fire, not block air intakes or exhaust in any manner. Do not place on soft surfaces, like a
bed, where opening s may become blocked.
11
、
Always place the Heater on a stable, flat, level surface when operating, to avoid the chance of the heater
overturning. Locate the power cord so that Heater or other objects are not resting on it, Do not run Power
Cord under carpeting .Do not cover Power Cord with throw rugs runners, or the like. Arrange Power Cord
away from room traffic and where it will not be tripped over.
RETURN INSTRUCTIONS FOR FUTURE REFERENCE
