Qlightec ST45L-USB, Instructions Manual

Page: 5 / 12

4 5
Installation Environment and Protection Rating
• This product is designed for use with protection rating of IP23.
• If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection rating
indicated(IP23), it may cause malfunction or damage to the product.
• For further information, please visit our website (www.qlight.com).
Parts Definition
USB CONNECTOR
USB CONNECTOR
USB POWER CONNECTOR
USB POWER CONNECTOR
Cover
(ABS)
Lens(AS)
Housing (ABS)
Pole(Al)
Buzzer hole
How to Change Lens Kit
• When rearranging or replacing the lens kits, please be aware of the
contact poin
t ①
and the connector pin
②
marked in the diagram on
the left.
• Press down to assemble the lens kits while making sure that connector
pin
②
and connector
③
aligns correctly.
• Please make sure that the rubber spacer placed on the top of each
lens kit is tightly secured to the bottom of the other lens kit.
※
Cautions
Lens modules are connected via the contact point of each module.
In case the contact point is damaged, it may cause contact failure.
②
③
①