4
①
•
First, machine holes on the mounting surface
①.
•
The mounting hole of this product is 8mm in diameter.
•
When machining taps, fasten the bolt through the mounting hole of
the bracket.
• When machining holes, insert the bolt through the hole of the product,
and tighten the nut from the opposite side of the mounting surface.
■
Installation
Horn
(STS316L)
Housing(AI)
Protection cage
(STS316L)
Lens (Tempered glass)
Parts Definition/ Installation/
Light Function Selection
▶LF :
Flashing
■
Light Function Selection(SESAL only)
• •
Please refer to the chart below to use light function
selection switch located inside the product.
• Default function is set at steady LED. Select the desired function
for your application during installation.
▶L :
Steady
■ Parts Definition
SESA/ SESAL/ SESALR/ SESAS
• Supply power to the product, and connect the telephone line (2 LINE) to the PSTN telephone line. (connected in parallel with the telephone)
•
When the phone rings, a telephone controller recognizes a signal that activates a relay. Once the relay is activated, the signal light & sounder
PCB is powered on and beacon & sounder will be operated.
• Beacon & sounder will be stopped when an operator receives a phone call.
Wiring method
Telephone Line
Summary of Contents for SESA-TI
Page 7: ...MEMO...
