2
•
External power line - 20AWG (0.5sq) × 2C 400mm
•
DC type : Black output line is negative(-)
QA85LSE
Ø5 CABLE ENTRY
PCD 117~120
Ø85.7
Ø132
90
20
360°/ 3-Ø5.2 HOLES
DC
Red
Black
Fuse
Power
DC12-24V
• Machine holes on the mounting surface referring to the
diagram below.
360°/3-Ø5.2 HOLES
QA85LSE
PCD 117~120
Lens(PC)
LED
Bolt
Housing(ABS)
Flange nut
• First, machine taps or holes on the mounting surface.
• The mounting hole of this product is 5.2mm in diameter.
• When machining holes, insert the bolt through the hole of
the product, and tighten the nut from the opposite side of the
mounting surface.
■ Parts Definition
■
Installation
■ Mounting Hole Specifications
Wiring Instructions
Parts Definition/ Installation/ Mounting Hole Specifications
Dimensions
(Units : mm)
Installation Environment and Protection Rating
•
This product is designed for use with protection rating of IP65.
•
If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection rating
indicated(IP65), it may cause malfunction or damage to the product.
•
In case of outdoor applications, installation in the upright position is suggested to minimize the effect of rain on the product.
•
For further information, please visit our website (www.qlight.com).
