+
-
2
1
3
4
+
-
EN - EPLS - 2306A
Lens(PC)
Housing(Al)
Bracket(STS)
EPLS
Model number
A
EPLS380
380
EPLS550
545
Fuse
Fuse
Fuse
h
22
4-Ø4 HOLES
1
Wiring Instructions
Parts Definition/ Installation
■
Parts
Definition
■ Installation
• First, machine taps or holes on the mounting surface
①
.
•
The mounting hole of this product is 3.2mm in diameter(Slot hole).
• When machining taps, fasten the bolt through the mounting hole
of the product.
• When machining holes, insert the bolt through the hole of the
product, and tighten the nut from the opposite side of the
mounting surface.
M12 connector type
Red
Black
Red
Black
Power
Power
Power
• This product can be wired regardless of polarity(AC Type).
• Please connect the 4 pins located in M12 connector cable to
the M12 socket of the product.
DC
AC
Installation Environment and Protection Rating
• This product is designed for indoor use with protection rating of IP20.
• If the product is installed in locations that subject it to excessive dust
or water other than the designated IP protection rating
indicated, it may cause malfunction or damage to the product.
• For further information, please visit our website (www.qlight.com).
Mounting Hole Specifications
• Machine holes on the mounting surface referring to the
diagram below.
Product Operation Inquiry / Customer S82-51-620-4100
You can expect prompt service if you have exact information such as model name, symptom, telephone number and address.
※
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
www.qlight.com
