Qlight SNE-TI, Manual

Page: 4 / 8

4
• External power line - UL1015 AWG18(0.75sq) x 2C 400mm
External telephone lines - UL1007 AWG22(0.3sq) 400mm
SNE-TI / SNEL-TI / SNELR-TI / SNE-S-TI
Telephone Line
'VTF
-
Fuse
+
-
Fuse
+
-
Fuse
+
-
Gray(GR)
Gray(GR)
White(W)
Black(BK)
Gray(GR)
Gray(GR)
White(W)
Black(BK)
Telephone lines(TEL)
Power
Gray(GR)
Gray(GR)
White(W)
Black(BK)
Telephone lines(TEL)
Power
Gray(GR)
Gray(GR)
White(W)
Black(BK)
Telephone lines(TEL)
Power
Gray(GR)
Gray(GR)
White(W)
Black(BK)
Telephone lines(TEL)
Power
Telephone lines(TEL)
Power
SESA - DC/AC
SEA - DC/AC
SNE/ SNES - DC/AC
SPNA-TI
QWH/ QWCD - DC/AC
Fuse
+
-
• Terminal block is located inside of the product. Unscrew the 4 bolts located in the upper
body to get rid of the upper lighting element of the unit.
• Please apply fork (U-type) or ring (O-type) locking spade terminal at naked tip of the wire for
secure connection.
• Connect the power line to the terminal
①
and
②
.
• Connect the telephone signal cable to the terminal
③
and
④
.
• For AC type products, wire regardless of polarity.
• For DC type products, wire terminal of black line to (-) polarity.
Wiring Instructions
Terminal Box Wiring Instructions
Wiring method
• Supply power to the product, and connect the telephone line (2 LINE) to the PSTN telephone line (connected in parallel with the telephone)
• When the phone rings, a telephone controller recognizes a signal that activates a relay. Once the relay is activated, a beacon PCB is
powered on and the beacon will be operated.
• Beacon will be stopped when an operator receives a phone call.
①
②
③
④
※
Applicable cable range : AWG16-AWG22