![background image](http://html1.mh-extra.com/html/qlight/s80al/s80al_instruction-manual_3321292003.webp)
3
Mounting Hole Specifications
•
Machine holes on the mounting surface referring to the diagram below.
50
60
4-Ø4.5 HOLES
Min. Ø5 CABLE ENTRY
Installation Environment and Protection Rating
•
This product is designed for use with protection rating of IP44.
•
If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection rating
indicated(IP44), it may cause malfunction or damage to the product.
•
In case of outdoor applications, installation in the upright position is suggested to minimize the effect of rain on the product.
•
For further information, please visit our website (www.qlight.com).
Installation
• Please mount fixing board
①
to the mounting surface using bolts. Then, connect the power line of terminal box.
• Hook the rear of the mounting bracket of the product to the upper fixing board
②
, then push the body against the fixing board.
• After tightly attaching the product body to the mounting bracket, tighten the bolt at the bottom of the mounting bracket
③
.
ⴙ
ⴘ
ⴚ