![background image](http://html2.mh-extra.com/html/qlight/s100s/s100s_operating-manual_3315373002.webp)
ww w.qlight.com
▪ Please make a hole by a drill where you need to attach our
product and refer to below picture for a hole size. (Make sure
PCD from external view drawing.)
▪ S100S : Fix the product by using nuts(M4-3EA) originally
equipped on mounting bolt on bottom of the product.
▪ S125S : Fix the product by using nuts(M5-3EA) originally
equipped on mounting bolt on bottom of the product.
1) ※ Warning!
Must turn off power supply and change bulb after 1 minute at
least.
▪ Xenon lamp emits superheat when working. Please be aware
you should not touch bulb before lowering its heat prevent
from a burn.
▪ Xenon lamp work with a high voltage, if you touch a
assembling board or lamp without power-off, you may receive
an electric shock.
2) Lens Removal
Remove lens by turning it counterclockwise. Please make sure
the lamp on the assembling board and Steady/Flashing selection
switch.
3) Change Lamp
▪ Our company’s xenon lamp (1) is made as a connector type
lamp. If you pull out with a small strength, it can be separated
easily.
▪ Please fit the lamp by checking a connector pin location (2) as
below picture.
Lamp removal Lamp fitting
4) Lens Assembling
Assemble the product in reverse order of separating.
▪ If using voltage is seriously higher or lower than rated voltage, it
can reduce the self-life of the product or can cause a problem
on product operating. Make sure the using voltage does not
/-5% of the rated voltage.
▪ If lens or body of the product is contaminated by chemicals such
as thinner, benzene, the product can be damaged, discolored
or deformed. Please be careful.
▪ Do not give strong impact to the product. It can be a reason of
wire disconnection or short circuit.
▪ Do not strongly pull the wire out from the product. It can cause a
disorder.
Situation
Main reason
Solution
Lamp non-working
Damage on Lamp
Change lamp
Lamp connector
badness
Re-connecting
lamp
connector
No Power Supply
Making sure power
supply
Strobe working
irregularly.
Supplying voltage
lower than rated
voltage
Making sure using
voltage
(S100S)
(S125S)
Bulb change
QLIGHT CO., LTD.
http://www.qlight.com
E-mail : [email protected]
Overseas Sales Team / Factory
Tel) +82-55-328-4082 Fax) +82-55-328-3883
185-25 Mukbang-ro Sangdong-Myeon, Gimhae-Si,
Gyeongsangnam-do, Korea
Inquiry for Product and C/S