ww w.qlight.com
3
QWH35/QWH35SD
QWH35/QWH35SD-DC/AC
▪ Power line and signal line are exposed to outside in case of LC
type which is using external contact for sound tone selection.
Please refer to below wiring diagram.
▪ Power line standard : UL1015-NO.18(0.75sq)Ⅹ2C 400mm
▪ Signal line standard : UL1007-NO.22(0.3sq) 400mm
▪ In case of DC type, black line is negative(-)
* Warning!
In case of add power into the common line and each signal line,
there will be sound output error.
6
How to mount
▪ This product is designed for out door use. However we
recommend you to use this where is less dust and water.
▪ Put appropriate holes where the product is installed. (Please
refer to dimensions for mounting holes)
▪ Fix the product by using M8-2EA.
7
Caution
▪ If using voltage is seriously higher or lower than rated voltage, it
can reduce the self-life of the product or can cause a problem on
product operating. Make sure the using voltage does not exceed
+/-5% of the rated voltage.
▪ If lens or body of the product is contaminated by chemicals such
as thinner, benzene, the product can be damaged, discolored or
deformed. Please be careful.
▪ Significant impact may cause of damage or short circuit.
▪ Do not pull out external lines too much. It may cause of damage
Issue
Cause
Solution
Sound Tone
Deterioration
or Volume
Decreasing
Supplying Voltage Lower
Than Rated Voltage
Make sure voltage
Higher
Volume(dB)
than Standard
Supplying Voltage Higher
than Rated Voltage
Make sure voltage
No Sound
Wrong Wiring
Make sure wiring
No Power Supply
Make sure power
supply
8
Trouble shoot
QLIGHT CO., LTD.
http://www.qlight.com
E-mail: [email protected]
Overseas Marketing Team /Plant
Tel) 055-328-4082 Fax)055-328-3883
185-25 Mukbang-ro, Sangdong-Myeon, Kimhae-Si,
GyeongNam, Korea
9
Customer Service Information
