ww w.qlight.com
ON
DP
1 2 3 4
MP3 저장용
SD카드 슬롯
SOUND 설정 스위치
PLAY MODE 설정 스위치
음량 조절용 VULUME
3
7
How to Operate
1. Wire power supply into POWER connecter.
Power
Red LED on
2. Red indicator light turns on.
6. In case of using SD card(MP3), set the sound switch-no.1 ON.
QMPS
control panel
Green LED flashing
2
3
1
6
Operational Sequence
3. Turn M3 bolt left by using plus screwdriver.
4. Move front cover down.(Warning : Using too much force may
be reason of front cover separation while move it down.)
5. In case of using pre-recorded sound, set the sound switch-no.1
OFF.
OPEN FRONT
COVER
When product operates
DC12V type: come out DC11V
DC24V type: come out DC23V
AC type: come out DC24V±10%
▪
Pre-recorded sound
① Set the sound switch no.1 off.
② PLAY MODE control switch-Choose play mode(Bit input/Binary
input)
③ SOUND set-up switch- Select sound group using no.2,3 and 4
④ In case of bits input, 5 sound tones can be played(CH1~5)
⑤ For Binary input, 30 sound tones can be played.(CH1~5)
▪
MP3(SD card)
① Capacity is 32Gbyte.(File Format : Fat32)
② Create“MP3_FILE”folder in SD card and save the file by
following below instruction.
③ Number of characters shall not exceed 40 alphabets.
④ Insert SD card into the card slot
⑤ Set the sound switch-no.1 ON
⑥ PLAY MODE control switch-Choose play mode(Bit input/Binary
input)
⑦ For bits input, 5 sound tones can be played(CH1~5)
⑧ For Binary input, 30 sound tones can be played.(CH1~5)
SD card slot
for MP3
Play mode set-up switch
Volume control
Sound set-up switch
