Qleen DISY E, User Information

Page: 21 / 36

| 21
Cleaning
Switching on the cleaning solution
1. Use the dosing pump regulator to set the mixing ratio of tap
water and cleaning solution
2. Briefly press the »Cleaning solution/tap water« button on
the machine or remote control, the button lights up green green
⇒ After a short time the cleaning solution comes out of the
nozzles via the black hose and the ROTAQLEEN starts
Turning on the tap water
1. Set the dosing pump controller to 0 %
2. Briefly press the »Cleaning solution/tap water« button on
the machine or remote control, the button lights up
turquoise turquoise
⇒ After a short time, the tap water comes out of the nozzles
via the black hose and the ROTAQLEEN starts up
Or
1. Press the »Cleaning solution/tap water« button on the
machine or remote control for 2 seconds until the button
lights up
turquoise turquoise
⇒ After a short time, the tap water comes out of the nozzles
via the black hose and the ROTAQLEEN starts up
2 Seconds
After plugging in the power supply, the machine is in the cleaning solution mode, except the
dosing pump regulator is set to 0 % then the machine is always in the tap water mode
The machine remains in the last cleaning mode after switching off and on with a short keystroke.