Qimova chair | User manual
Version 1.11 | Page 25 af 43
5
Adjustment of the chair
5.1
Height adjustment
The seating height can be adjusted by changing the distance from the bottom frame to the
seat. The height should be set up once for each user, when the chair is delivered. If it
becomes necessary to make this kind of adjustment again, contact your local dealer.
5.2
Centre of gravity
If you need to change the chair’s centre of gravity, this can be done by changing the
position of the tilting device under the seat. If it becomes necessary to make this kind of
adjustment again, contact your local dealer.
5.3
Seat depth
Adjusting the seat depth
The seat plate can be adjusted in length.
Loosen the 4 screws (A) on the top of the
wooden seat plate, move the plate to the
desired position and tighten the screws.
Figure 12
5.4
Seat width
The seat frame can be adjusted in width in increments of 2 cm. The width should be set up
once for each user, when the chair is delivered.
To adjust the width of the seat frame, remove the cushion and remove the four screws
placed in the front (A and B) of the seat frame, the four screws placed in the back (C and D)
of the seat frame and the four screws placed in the lower part of the backrest frame (E and
F). Pull each side of the seat frame to the desired position, making sure the new position
aligns with corresponding holes in the seat and backrest frames, put in and tighten the
screws again.