Qimova chair | User manual
Version 1.11 | Page 17 af 43
Pull the knob and adjust the anti-tip devices in length, rotate them or remove them. The
anti-tip devices are dented in a way that makes it easy to make adjustments. After placing
the device in the desired position, simply slip the knob in place.
It is highly recommended that you use the chair permanently fitted with the anti-tip/step
tube device, as it will prevent the chair from tipping backwards in extreme positions.
Situations will however arise, where it may be necessary to remove or position them in an
upright state. In such cases, it is strongly recommended that an attendant is present at all
times.
4.3
Seating system
Both the seat and the backrest are built on firm steel frames, which give a strong and stable
construction to the chair. Apart from the standard seat and backrest sizes, the position of
the seat on the seat frame can be adjusted see section 5.3
The upholstery is moulded in cold foam. The side supports in the back as well as in the seat
compensate for different seat widths. In most cases, the side wedges in the backrest can
serve as side supports. The cold foam is designed to keep its form for many years.
Upholstery is 88% polyester and 12% polyurethane.
4.3.1
Backrest adjustment
The following section covers how to adjust the backrest.
