• In households with animals: You will have to periodically wipe down the grille
to prevent blocked airflow due to animal hair.
•
Clean the appliance using a lightly damp, lint-free cloth and mild detergent.
Dry the appliance with a dry, lint-free cloth.
• Run the appliance on FAN mode for 12 hours in a warm room to dry it and to
prevent mould (every 6 months or before storing the appliance).
• Before each season, check and make sure the power cable and plug are
undamaged and the earth system is efficient.
• After each season, empty the internal circuit completely of water. Remove the
drain plug, run off all water left into a basin. When all water has been drained,
replace the drain plug in place.
7. TROUBLESHOOTING
SELF-DIAGNOSIS
The appliance has a self-diagnosis system to identify a number of malfunctions.
Error messages are displayed on the appliance display.
Error code
Possible solution
PROBE FAILURE
(Sensor is damaged.)
• If this is displayed, contact your local
authorized service center for help.
FULL TANK
(Safety tank is full.)
•
Empty the internal safety tank, following
the instructions in the “Maintenance and
cleaning” section.
Problem
Cause
Solution
The appliance can
not be turned on.
• It is not plugged into the
mains.
•
Plug the appliance into
the mains.
• The internal safety device
has tripped.
• Wait for 30 minutes, if
the problem persists,
contact your service
center.
19
19
EN
