S1-B2 MANUAL
26
Mode Two: Manually charging
Plug the power wire into the power sock. Move the robot and make the charging sheet metal on the back of the robot contact with the charging metal sheet. Press the
emergency charging button on the charging pile.
Mode Three: Wire charging
Take out the power adapter in the charging pile. Connect one end to the charging socket on the back of the robot and the other end to the power socket.
Note:
Since the robot cannot move in the mode of wire charging, all functions related to movement, such as moving forward, circling, wandering, following, dancing, etc., will
be forbidden. But other functions, such as playing films and music, turning on the projector, etc., will not be affected. When it charges via the charging pile, the robot can move
freely. Charging will stop if the robot disconnect with the charging pile.
3. Battery Indication
For the robot (Power on status):
When it isn’t charging, the wing indicator light flashes red which means the residual battery capacity is equal to or less than 40%. The touchscreen also displays current
residual battery capacity.
