Qiagen QIAgility User Manual Download Page 82

Page: 82 / 334

QIAgility Software

5-20

QIAgility User Manual 11/2011

Reagent

Please refer to Section 5.9.3 for detailed information about

the “Reagent” right-hand pane.

Master mix

Please refer to Section 5.9.4 for detailed information about

the “Mix” right-hand pane.

Sample

Please refer to Section 5.9.5 for detailed information about

the “Sample” right-hand pane.

Reactions

Please refer to Section 5.9.6 for detailed information about

the “Reaction” right-hand pane.

Progress report

Please refer to Section 5.9.8 for more detailed information

about the “Progress report” right-hand pane.

5.4

User management

User management allows the definition of different access

rights to various data and functions within the QIAgility

Software.
User management functions are accessed from the menu bar

(“Options/User management”).

5.4.1

User identification

Unlike software that requires separate login authentication,

the QIAgility Software user is defined as the current Windows

user logged on the laptop on which the software is installed.

Summary of Contents for QIAgility















































































































































































































































































































































Search results

Summary of Contents for QIAgility

Reviews:

Related manuals for QIAgility

Brands by name

Popular brands

Qiagen QIAgility, User Manual

Search results

Summary of Contents for QIAgility

Reviews:

Related manuals for QIAgility

Brands by name

Popular brands