Qiagen QIAgility, User Manual, Page: 142 / 334

QIAgility Software
5-80 QIAgility User Manual 11/2011
4. To add a sample to the sample bank list, check the box
to change the contents of the cell to “Yes”. To remove a
sample from the sample bank list, check the box to
change the contents of the cell to “No”.
Note : Samples that are assigned to the selected sample
bank are highlighted white, and samples that are not
assigned to the selected sample bank are displayed in
gray.
Alternatively, it is possible to copy and paste a column of
”Yes”/”No” values from a spreadsheet. Right-click in the cell
of the desired starting row, then select “Paste to current cell”.
Samples are given default sample names, based on their
position in the sample plate. To change the sample name, to
input a sample ID, or to input a starting concentration, left-
click on a cell in the “Sample Name”, “Sample ID”, or
“Conc.” column. Directly enter the desired information.
5.9.6 Reactions
Pipetting operations in a given run are defined by a
“Reaction List”. Reaction lists can be created and modified
using the “Reaction” right-hand pane.
To view the “Reaction” right-hand pane, left-click on a
reaction plate. The buttons located below the “Reaction List”
can be used to configure the list. The “Reaction Data” panel
lists the wells and contents of the selected reaction plate. It
also enables reaction data to be imported from a
spreadsheet and exported to another file.
See Section 5.9.7 for more detailed information about
importing and exporting information into the “Reaction”
right-hand pane.