POWER SOURCE
1. Please charge the unit at least 4 hours before first time using.
2. Turn the dial clockwise/anticlockwise to switch on/off the unit.
CHARGE THE BATTERY
When the battery is charging, the CHARGE STATUS light shows on the
LED display is red. After the battery has fully charged, the light turns off.
1. Connect the USB charge cable to the DC5V interface of the speaker firmly.
2. When the battery is fully charged, please disconnect the USB charge cable
from the speaker.
3.The speaker works normally when charging.
POWER/VOLUME
Twist the dial clockwise/anticlockwise to increase/discrease the volume.
PREVIOUS/NEXT BUTTON
Under playing status, press PREVIOUS/NEXT button to get back to a previous
or next song.
PAUSE/PLAY BUTTON
To stop playing the current track, please press PAUSE/PLAY button on the
control panel. Press it once again to continue playing.
MODE/LED ON
Long press to turn on/off light.
Lightly press to enter into playing mode selection (Bluetooth, FM Radio,
AUX Input, USB).
AUX IN JACK
1. Connect an audio cable to the AUX IN JACK of the speaker and to
the audio output socket on the external audio devices such as MP3 player,
discman, etc, then select LINE by pressing the MODE/LED ON button on the
control panel.
2. Play from an external audio device.
MIC IN JACK
Plug in microphone directly for playing.
USB JACK
Insert USB card directly for playing.
FM FUNCTION
Press MODE/LED ON button to switch to FM mode. Press PLAY/PAUSE
button on control panel for automatic searching and saving the radio
stations, by pressing PREVIOUS or NEXT you can select a previous or next
radio station.
Bluetooth:
Press MODE/LED ON button to toggle through functions, BT, AUX, USB, FM Radio
To pair your BT-89 to your mobile device, begin by turning on the BT-89. Proceed by enablingthe
Bluetooth function on the unit (BT-89). Once enabled, open your mobile device settings and
search for “QFX BT-89”. Select “QFX BT-89” and wait for succeful connection. your mobile device
and BT-89 should be paired and ready for music playback.
